Injection Molding MachineMachine Tools

HIGHSUN SP200: SP smart power injection molding machine

The system pressure is increased from 16 MPa to 17.5 MPa, the hydraulic system flow is increased and upgraded, and the low inertia high response servo system is adopted. It has the characteristics of large pipe diameter, short pipe length, fast response, low noise, strong power, etc., and the injection speed is fully improved.

Parameter / Model SP200/i810
Screw Diameter (mm) 50
Screw L/D Ratio (L/D) 20
Injection Capacity In Theory (cm³) 441
Injecction Weight (PS) (g) 402
Injection Pressure (MPa) 186
Injection Rate (g/s) 206
Plasticizing Capacity (g/s) 24
Screw Speed (rpm) 210
Clamping Force (KN) 2000
Moving Mould-Plate Stroke (mm) 540
Max. Mould Height (mm) 600
Min. Mould Height (mm) 200
Space btwween Tie-Bars (WxH) (mm) 530×530
Hydraulic Ejector force (KN) 67
Hydraulic Ejector Stroke (mm) 150
Ejector Number (n) 9
Pump Pressure (MPa) 17.5
Motor/Driving Power (KW) 30
Heating Capacity (KW) 13.55
Machine Dimension (LxWxH) (m) 5.39×1.34×2.13
Machine Weight (t) 7.4
Oil Tank Capacity (L) 280

error: Content is protected !!
X