Lathe MachineMachine Tools

LATHE MODEL S480x1500 Winho

Specification S480x1500
Swing over bed 480 mm (18-1/2″)
Swing over cross slide 280 mm (11″)
Center Height 235 mm (8-1/2″)
Center distance 1500mm (60″)
Swing over gap 690 mm (27-1/8″)
Bed Width 300 mm (11-4/5″)
Spindle nose ASA D1 -6 / D1 -8 (Opt.)
Spindle bore 58 mm (2-1/4″) / 80 mm (3″) (Opt.)
Taper of spindle bore MT6/MT7 (Opt.)
Spindle speed 20~2000 rpm (12 steps)-spindle bore:58 mm /
40~2000 mm (12steps)-spindle bore:80 mm
Inch Threads range 4~56 TPI
Metric Threads Range P0.5~P7
Longitudinal feeds range 0.05~0.82 mm (0.002~0.032″)
Cross feeds range 0.02~0.4 mm (0.001~0.0094″)
Leadscrew Diameter 35 mm (1-1/3″)
Leadscrew pitch 4TPI or 6 mm
Taper of tail center MT4
Tail spindle travel 150 mm (5-7/8″)
Tail spindle diameter 68 mm (2-2/3″)
Main drive motor 7.5HP (5.625KW) / 10HP (7.5KW. Opt.)
Coolant pump 1/8HP (0.1 KW)
Compound rest travel 125 mm (4-7/8″)
Cross slide travel 245 mm (9-2/3″)
Machine / Packing Dimensions (mm) L:2650 W:1000 H:1220 / L:2790 W:950 H:1680
Net weight / Gross weight (kgs) 2075 / 2225

error: Content is protected !!
X