TakamazMachine Tools

Takamaz XV-3 [3, 4 inch]

Takamaz CNC VERTICAL LATHE

Integration of diverse processes

Three spindles are installed in one machine. Power tools can be mounted, allowing turning and a variety of other machining including horizontal hole machining too. The transport device that passes laterally through the machine can transfer a workpiece to each of the three spindles, allowing any required process configuration such as 1-1-1, 1-1-2, 1-2-2, and 1-2-3. Because the individual lathe units have equal capabilities, the same process can be shared among the three spindles without considering differences in capability.

Labor savings at setup changes
A self-loading configuration is adopted to move the spindle directly to a traverse-type transfer device for workpiece transfer. The transfer device has a workpiece turnover function, eliminating the turnover device between processes. The number of transfers between chucks is reduced, which also decreases the possibility of momentary stops, the number of setup changes, and setup man-hours.


Pursuing ease of maintenance and space savings
The inverted spindle is provided at the front of the machine. The major mechanical parts, such as the turret, slides, and transfer device are also placed at the front of the machine to ensure ease of maintenance and space savings. In addition, oil mist lubrication is adopted for the spindle, simultaneously achieving high spindle speeds and long service life.


Proposal for total cost reduction
Three spindles and a turret are integrated into one machining chamber. The machine handles the processes equivalent to three machines, only with one coolant tank, oil controller, chip conveyor, mist collector, etc.
Cost reductions can also be expected because there is no need for inter-process workpiece transfer equipment or turning equipment.

ItemAbilityUnit
Chuck sizeCollet, 3, 4inch
SpindleSpindle bearing I.D.φ60mm
Spindle speedMax. 10,000min-1
Tool postTypeGang type
Max.strokeX:160
Z:200
Y:265
mm
Rapid traverse rateX:12
Z:24
Y:24
m/min
Power toolsTool storage capacity3(×3 unit)pcs.
Rotation speed8,000min-1
Capabilitiesφ5 M5mm
Spindle motorAC5.5 / 3.7kW
W × L1.600(2.075 Opt.)× 2,180mm
ControllerTAKAMAZ & MITSUBISHI M80
Contact information for product inquiry

    error: Content is protected !!
    X